Where Can I Order Golf Quarter-Zips With an Embroidered Company Logo?

You can order embroidered quarter-zips through four channels — the factory directly, a brand's custom program, a local embroidery shop, or a B2B sourcing platform — and the right one depends on quantity. At 50+ pieces, factory-direct gives the lowest unit cost and full control of the garment; under about 12 pieces, a local shop embroidering blank stock you supply is faster and cheaper.

For an embroidered company logo, have three things ready before you request quotes: a vector file (AI, EPS or SVG — not a JPG), the target logo width in inches, and the stitch colour codes or a Pantone reference. Typical production embroidery runs 3.5–4 inches wide on the left chest at 7,000–10,000 stitches, and factory-direct orders usually start at 50–100 pieces per colourway.

This is written for the buyer who already knows they want a zip-neck layer with the company logo on it and needs to decide where to place the order. If you are still choosing the garment itself — fabric, fit, zipper quality — start with the quarter-zip sourcing guide instead.

The four channels, compared

Channel	Typical MOQ	Unit cost	Logo method	Lead time	Best for	Main risk
Factory direct (OEM/ODM)	50–100 pcs per colour	Lowest	Embroidery or sublimation, on your garment	20–35 days incl. sampling	Teams, corporate programmes, 50+ pieces	Longer lead time; needs a spec you can defend
Brand custom programme	12–50 pcs	Mid to high	Embroidery added to existing stock styles	10–20 days	Small teams that want a known brand garment	Limited to that brand's styles and colours
Local embroidery shop	1–12 pcs (shop-supplied blanks) or customer-supplied	Highest per piece	Embroidery only	3–10 days	Small offices, samples, urgent top-ups	No control over the garment; shop margin on blanks
B2B sourcing platform	Varies by listed supplier	Lowest to mid	Whatever the supplier offers	15–40 days	Price discovery, comparing multiple suppliers	Quality varies between suppliers; verify before bulk

Two rules of thumb cut through most of the decision:

1. Above 50 pieces, go factory-direct. You are no longer buying a garment with a logo; you are specifying a garment. That is where fabric weight, collar construction and zipper choice become yours to set instead of inherited.

2. Under about 12 pieces, buy blanks and have them embroidered locally. Digitising the logo is a one-time cost you can reuse across suppliers later, and you avoid a 3-week production run for a dozen garments.

What to prepare before you ask for quotes

Most first-time buyers lose a week to this step. Suppliers cannot quote embroidery accurately without it.

Item	What to send	Why it matters
Logo file	Vector: AI, EPS or SVG (PDF at 300 dpi minimum)	Embroidery machines need paths, not pixels. A JPG must be redrawn (digitised) first — a paid step
Logo width	Target size in inches or mm (left chest standard is 3.5–4 in / 89–102 mm)	Determines stitch count, price and whether small text survives
Stitch colours	Pantone or thread colour codes (e.g. Madeira or Isacord references)	Thread ranges do not match print colours; a named reference removes the mismatch risk
Placement	Left chest, left sleeve, nape, right chest — with height from the shoulder seam	Placement changes the backing and the panel stability
Quantities	Pieces per colourway and per size, plus spares	Embroidery setup is per design, not per garment — but colourways change the fabric run
Target date	In-hands date, not ship date	Builds the sampling and freight buffer into the quote

A logo with text under about 5 mm high will not embroider legibly. If the logo carries fine type or a gradient, that is a signal to compare decoration methods before committing — see embroidery vs printing.

Embroidery specification for a company logo

Parameter	Typical specification	Note
Logo width (left chest)	3.5–4 in / 89–102 mm	Larger reads as outerwear; smaller disappears at a distance
Stitch count	7,000–10,000 stitches for a 3.5–4 in logo	Below 5,000 the design loses density and coverage
Thread colours	1–6 colours typical; up to 8 on premium programmes	Each colour adds a thread change, small cost
Digitising	One-time fee, commonly USD 50–150, reusable	Ask for the .DST file — that file is your asset
Minimum text height	5 mm	Below this, letterforms collapse
Backing	Cut-away for knits; tear-away only for stable wovens	Knitted quarter-zips need cut-away to stop pull-through

Six questions that filter suppliers fast

1. "What is your MOQ per colourway, and does that change for a logo?" — Distinguishes stock-with-logo resellers from actual production.

2. "Can you send the digitised file (.DST) with the order?" — A supplier who refuses is locking your logo into their machine.

3. "What thread brand and colour codes do you use?" — Named thread systems (Madeira, Isacord) allow a colour match anywhere later.

4. "What is the lead time from artwork approval to shipment, including the sample?" — Forces the sampling stage into the schedule instead of discovering it later.

5. "How is the logo checked against the approved sample?" — Ask for the measurement and placement tolerance on the approval sheet.

6. "Can you show a photo of a finished logo in the same thread colour on the same fabric colour?" — Thread on a contrast fabric behaves differently from thread on a matching one.

If you are comparing factories rather than channels, the same diligence applies as for polos — our manufacturer verification checklist covers sample approval, certification and third-party inspection.

A typical factory-direct timeline

Stage	Working days	What you approve
Quote and spec confirmation	1–3	Garment spec, logo size, colourway, quantity
Digitising and logo strike-off	3–7	A stitched sample of the logo on the actual fabric
Garment sample (fit and colour)	7–14	One finished quarter-zip with logo in place
Bulk production	15–25	—
Quality check and packing	2–3	Placement and stitch inspection against the approval sheet
Freight	3–10 (air) or 25–40 (sea)	—

Total, in hands: roughly 5–8 weeks for a first order by air freight. Repeat orders skip digitising and sampling, which typically removes 1–2 weeks.

Which channel fits your programme

Your situation	Recommended channel	Why
Club team, 60 pieces, one colourway	Factory direct	Unit cost advantage covers the longer lead time
Company of 8, existing brand polos	Local embroidery shop on shop-supplied blanks	No MOQ, days not weeks
Corporate programme, 4 colours × 200 pieces	Factory direct, one spec sheet per colour	Colourways are a fabric run, not a logo change
Testing the design before committing	Local shop, then factory for bulk	Validates the logo on a real garment cheaply
Event in 10 days, 30 pieces	Brand custom programme	Stock garments with embroidery beat any production run

Browse our quarter-zip range to see the constructions available for factory-direct orders, or start a project if you already have the logo file and quantities.

FAQ

1. Where can I order golf quarter-zips with an embroidered company logo? Four channels: factory-direct OEM/ODM (best unit cost from about 50 pieces), a brand's custom programme (12–50 pieces, existing styles), a local embroidery shop (under about 12 pieces, fastest turnaround), or a B2B sourcing platform for price discovery. The choice is driven by quantity first, then by how much control you need over the garment itself.

2. What is the minimum order for embroidered quarter-zips? Factory-direct production typically starts at 50–100 pieces per colourway, because the fabric and cut run is the fixed cost. Local embroidery shops have no real minimum when you supply the blanks — you pay per unit for the stitch run instead. Brand custom programmes usually sit between the two, at roughly 12–50 pieces.

3. What file do I need for an embroidered company logo? A vector file — AI, EPS, SVG, or a 300 dpi PDF — because embroidery machines follow paths rather than pixels. If you only have a JPG or a screenshot, the supplier must digitise it first, which is normally a one-time fee of about USD 50–150. Always request the resulting .DST file so the asset stays yours.

4. How much does embroidery cost per piece? Cost scales with stitch count, thread colours and quantity, so it must be quoted per project. What you can control: keep the left-chest logo between 3.5 and 4 inches, stay within one to six thread colours, and reuse the digitised file on every future order. Reorders that skip digitising and sampling are meaningfully cheaper per piece.

5. How long does an embroidered quarter-zip order take? For a first factory-direct order, budget 5–8 weeks in hand with air freight: roughly 3–7 working days for the logo strike-off, 7–14 days for the garment sample, 15–25 days for bulk production, plus freight. Repeat orders skip digitising and sampling and typically save one to two weeks.

6. Can I supply my own quarter-zips to an embroidery shop? Yes — this is common and it is the cheapest route for small quantities, since you pay only for the stitch run. Check that the shop uses cut-away backing on knits, and supply the shirts unwashed and unfolded. Note that the shop will not warrant the garment, only the embroidery, so inspect blanks for faults before delivery.

7. Is embroidery or printing better for a company logo on a quarter-zip? Embroidery is the default for a logo on a zip-neck knit, because the stitched logo holds up to washing and reads as a deliberate corporate detail. Printing suits all-over patterns, gradients and photo-real graphics, which embroidery cannot reproduce. Many programmes combine both: embroidered logo on the chest, printed or sublimated design elsewhere.

8. Do I need to order a sample before bulk embroidery? Yes, and insist on two stages: a logo strike-off on the actual fabric (to judge thread colour against the fabric), then one finished garment sample with the logo in place. Approve both in writing with measurements, because embroidery placement and density are the two defects that most often fail inspection on a delivered bulk order.

Related reading

Golf Quarter-Zip Sourcing Guide: Fabric, Fit, and the Zipper Nobody Checks

The Golf Pullover Problem Nobody Talks About

Should I Choose Embroidery or Printing for Custom Golf Shirts?

Shop: custom golf quarter-zips

References

ISO 4915 — Stitch types, classification and terminology (embroidery stitch definitions); ISO 3758 — Textiles: Care labelling code using symbols; AATCC 135 — Dimensional Changes of Fabrics after Home Laundering; Madeira and Isacord thread colour systems — industry thread reference ranges used for colour matching; OEKO-TEX Standard 100 — Limit values covering embroidery threads and backing materials; AISNUG production records — logo size, stitch count and placement tolerances by programme, 2026